Update I hooked up the good ol' DICE (thanks again to 1MoreTech), and it really doesn't look good.20200819_170742.jpg Does anyone know where I can rent the cam locking tool? I'm sticking to the gasket plan, hopefully that will keep her going for a while. Some or many of those codes are related to e...

I'd have a machine shop check the head, it might just need a quick shave.

passenger fender, I recall if unplugged the sunroof should work, you'll get some error mssg about alarm signal or something but the roof should function. I replaced my module with a junkyard part and that was bad too, installed new nicad battery and it still didn't work, so I just snipped the wire. ...

Ok, to make this as easy as possible, I just need the correct answer to this hypothetical situation. If you have a 06 s60R, with no timing belt on it, the crankshaft marking is in its correct position to the blocks marking, but the cams are not lined up and am not sure if they have been rotated or ...

Duckie83 wrote: ↑01 Feb 2021, 12:19 I just bought the XC70 where is a good place to get aftermarket upgrades? Exhaust - turbo back, intake, mostly the basics. Still getting into the turbo world.

Located in Utah.

try IPD, banner at the top of the page. some good custom aft mkt parts, some vanity parts too.

I consider it a feature.

So I had to pull the head off to repair a head gasket. Took the head to get it RRd the guys asked if I had the lifters in the right order. This was news to me as the other two heads I’ve done were 98 and didn’t seem to need a spec order putting them back together. My question is am I going to have ...

I need your guys help: I have a 2005 xc70, was getting ready to install the rear tow hitch and buy the proper harness, and was looking to be sure I bought the correct 'doohicky'-male/female receptacle, and low and behold, mine does not have a plug in, at least under the mid-section. Is there anywhe...

Good job.
Now I can go back to staring out the window.

in a day or two I'll take some pics of mine, way too cold now.