So with some luck I've found one with the same P/N, but, it's condition is kinda questionable, same place, same leaky cap. Also it always spins blower motor, even if ignition is off. I'll try to find if 9134932 works for me.

One of guys from russian car forum gave me ADX, but it's in Russian. If anyone wants it - I can give the file here

xnRS wrote: ↑23 Jan 2025, 06:46 Also searching for 0261203077 (2.5 N/A USA) binary

Or just any N/A USDM M4.4 Binary

I think I've found the issue, my M4.4 ECU is from a NA version. From what I've read it seems like the M4.4 should be from a Turbo version Do you think that matters? It absolutely matters. The NA ECUs don't have the components populated on the board for the TCV control. Just two 0 Ohm 0805 resistor ...

This supposedly also fits 98 cars as well with the older large lock nut on the hub. It will depend on the axles for a 94 and what the ends are like to have the provision to fit the seal. If you look at Abscates pictures on page one, you will see there is a lip on the end of the axle just in front o...