This may help. --------------------------------------------- Piston running clearance (example) Measured cylinder diameter........ 83.015 mm Measured piston diameter........ 82.995 mm The piston running clearance is........ 0.020 mm The piston running clearance must be 0.010–0.030 mm. Piston rings A...

DIY: 1998 Volvo V70 Fuel System Troubleshooting Tips * No-start is a very frustrating problem for car owners, so download these diagrams (and a jumper wire) and keep them in your glove box. Reading electrical diagram can be confusing, but no worry, I will make Fuel System trouble-shooting painless ...

Do dogs count?

I just know the box. Mahle, Mann... starts with an M. Green cheap looking box. I remember hearing issue of other filters not having the correct filtering surface area, causing knocks from little flow, not fitting onto boss on engine tight, incorrect dimensions, etc etc. There is so much MUIS (made ...

I have taken the shaft out of my 2011 xc70. Yes it can be done without exhaust removal. Remove driveshaft cv bolts front and rear with a 8mm hex socket, a universal and extensions. I then unbolted the carrier mounts from the car. I started with the rear and then did the front carrier mount. Exhaust...

Obviously that's a radio interference filter to prevent misfires. Super common on small engines like that!

I’ve been planning to change/refresh the front suspension of our 2011 XC70 (original owner) with 210K KM for some time and finally got chance to get it done this past Summer and I would like to share my experience with fellow Volvo P3 owners who inspired me to get it done. What got me wanting to ref...

I invested heavily but seem to be underwater …