I cleaned out a glass jar with a metal lid. this is important, you need metal or glass as these solvents dissolve alot of plastics or other materials. any pickle jar. mason jar etc will work. I used a salsa jar. I cut the ABS filament into small pieces and put then in the jar then added MEK and put ...

here is the broken part to repair followed by the repair itself.
Note in this case I also used some flat nails from a nail gun as stretchers across the breaks to fortify them. It worked extremely well.

I built up the patches from the back along with the nails to give it some strength

Here is the end result from the front. Not perfect but over all I am happy with the result.

i got it taken care of. I sprayed both with blaster last night and again today. I removed the calliper, bracket and rotor. Unfortunately there was nothing to grab on to, so I went the way of an easy out. When I drilled the first one, the bit caught and ended up screwing the remainign stud out the ba...

I forgot to add.... after this and upon 30k I plan to switch to the Gibbons method and replace the fluid wholesale from there on out.

I think it worked THANK YOU!!

As soon as the sun comes up I will connect it and make sure.

AEG, The front end of the 850 is a different design than the '98-00 S70s, meaning the hood, fenders, bumper cover, header panel, headlight assemblies, and corner lights are all different. The hood and fenders are not compatible due to differences in design and mounting points. A full front-end conve...

There are some possibilities and based on your description, your issue is when the drive train is under load so Thats where I suggest your focus. These are strictly my opinion. I think your likely culprit is a bad CV joint. While it is not definitive - there could be other issues based upon what yea...

+1 on tires/rims Before I found a trustworthy tire shop, i would have a similar issue when changing tires or buying new ones. When my tire guy started his own shop, problem solved. I took my new tires <100 miles into him and he immediate spotted the issue described above. the tires were balanced wit...

No pictures, but I cant count the number of 8, 10 and 12 ft lumber boards going through the back seat access hole and sticking out of the trunk a fair distance......