Replacement fuel injector connectors These are what I used to replace my broken electrical connectors. They fit perfectly, and are a lot cheaper than getting them from Volvo. The last price I saw was $25 for 1 connector, and this is a set of 8 for less than $20. No need to cut the factory wiring to...

You're welcome. I meant to do the write up when I changed them on the car, but I couldn't really hold my phone to show everything as detailed as I could this way. The nice bonus is there's 3 extra connectors in the kit. I would strongly recommend that you practice with at least one of the new ones, ...

MVS Readers, Time for the next oil change - Pennzoil Platinum Ultra 5W30 And ATF change (3 liters) - Idemitsu ATF Type TLS (T-IV) Note: this is the first time that I used Idemitsu if I notice any change I'll post here Here is the Odometer reading My S80 is running extremely well IMG_5928.JPG I also ...

This is where the oil goes to return to the pan when the filter is removed (Note: I removed the spring / rubber disc from this assembly) https://www.freel2.com/gallery/albums/userpics/13868/IMG_3752.JPG This one has a missing rubber disc (its broken) https://www.freel2.com/gallery/albums/userpics/1...

FIXED !! (let's hope I didn't jynx it...) Ok, here's the deal. It's been over 5k miles since I installed the spacer and replaced the PCV Trap. (See my last post) I did both of these things together even though neither were "needed" as the last attempt to fix this problem, hoping (and not c...

I think I may have a solution... It appears that Ford uses the same style of anti-drain back setup on the oil filter housing of their diesel F-150s and have had a rash of the same type of issue with the valve failing. Ford issued a TSB (22-2386) for the issue and have a part available, ML3Z-6A606-A....