Having not done that, I don't know. The main issue is to maintain the resistance withing the required tolerance. If you can, then why not. It may be worth checking the tone/reluctor ring is not dirty or rusted, or worse cracked on that wheel if you pull the sensor. Removing and cleaning is and the ...

I did a hg leak test. Even with empty tank when I turned the car on the coolant would rise very fast and spill out. The car is at the mechanic atm and I will change the motor with one I had with 100.000ish km

It happened again today. I don't know if it was a good idea but I drove around 150km to my city anyway. Found a used sensor and changed it while also checking wiring. Wiring is pretty bad (the outer black plastics start to crumble) but as far as the wiring goes it seems fine. Is it viable and (relat...