About time I get the adapter I guess... Will look into the app too. Thanks for the suggestions. Also for the documents! Thanks a lot. Is it fair to assume that Motronik4.4 and Fenix 5.2 ECM pinout matches at least to a large extent? Have a great weekend y'all! Large yes.. but you then missing examp...

Large yes.. but you then missing example second Lambda sensor and MAF on 10V engines if try install M4.4. I want share couple things as i have personally Fenix and 10V too. -No, there is no ECM hack existing to tell it not to look IMMO (Fenix 5.2.. all is for Fenix 5.1 or other models and yes i tri...

That looks like the accessory connector.

Weird question but do all your lights and turn signals function right when you start the car? If you push the key or shake it will they function if they do not as of now? I know a bad switch can cause these not to turn on. Could you be facing an extreme case?

I an not sure with EU models as you got shipped keys earlier than us, and with all the updates after 99 that I am familiar with as that is when we got chipped keys. In that case we have to swap everything that stores the Vin#. I'm not sure if the IMMO stores the Vin# or if it just compares info from...

Fuse ok?

Late last year I disassembled and repaired the drivers side headlight wiper actuator in my 2000 V70. I took some photos of the process but haven't posted them anywhere until now. There are tutorials online about how to get the actuators out of the car. The component that fails is the solid state fus...

Went to the junkyard to try to find a decent H7 headlight bulb connecter for inside the P80 headlight. I don't like to cut a pigtail out of a 'good' headlight. I only do it from a broken or badly de-silvered unit. Needles to say they were all worse than what I have. I will have to submit to buying s...

Those 2 may be linked. Your blower motor may have failing bearings or dry bearings which draws more current than it should.

Neil.

Yes Robert's video will work well for this. Hardest part is -98 P80's had a knee protection bar above your knees behind the under cover for the dashboard and for LHD cars is is the passenger side. You will have to remove the glove box liner (be careful as at this age the T25 Torx screw holes become ...