Search found more than 2659 matches
- 28 May 2021, 08:56
- Jump to forum
- Jump to topic
Re: Have a code scanner recommendation?
I use an Actron made by Bosch. Works fine - no issues. But I don't think it reads SRS or trans codes etc. Just the basic stuff.
- 28 May 2021, 18:23
- Jump to forum
- Jump to topic
Re: Have a code scanner recommendation?
I recently purchased an Innova 6030P, about $80.
Reads ABS, live data bluetooths to phone with Repair Solutions 2 app. (Free). Downsides short cable, really need 2 people to read live data while driving.
Reads ABS, live data bluetooths to phone with Repair Solutions 2 app. (Free). Downsides short cable, really need 2 people to read live data while driving.
- 29 May 2021, 10:26
- Jump to forum
- Jump to topic
Memorial Day @ FCP Euro
Hey everyone. Instead of a sale this Memorial Day Weekend, FCP Euro will be donating 5% of all sales to the PenFed Foundation that directly supports veterans and active service members with the goal of raising over $50K! PenFed Foundation for Military Heroes The mission of the PenFed Foundation for ...
- 29 May 2021, 17:29
- Jump to forum
- Jump to topic
Re: What does your garage look like?
Nice. Charles and Ray Eames design manufactured by Herman Miller. Spare parts are available at a H-M store, which they have to have in Denver. We even have one here and they just put free arms on my office chair At 12 years old!
- 30 May 2021, 17:54
- Jump to forum
- Jump to topic
VIDA 2014D_Repack install on Windows 10, any version.
Decided it was time to bring all the install information together in one place. --------------------------------------------------------------------------------------------------- Files you need. 2014D_Repack.iso Patch 2014A-B-D-2099.zip Click the link above to get the 2099 patch. Upack it to a fold...
- 31 May 2021, 11:02
- Jump to forum
- Jump to topic
Re: Volvo 2.5T AWD 2003 Automatic delay 3 to 4
********************************************************************************************************************** Hello again Did the measurement and I got 19.5mm from the edge of the wood to the marking I did with a saw blade. This was with the piston pushed all the way in and pushing against...
- 03 Jun 2021, 20:01
- Jump to forum
- Jump to topic
Re: Thanks for using the MVS-Amazon link!
Hey! Haven't been here in a bit, but I am spending on Amazon. Great reminder for everyone to use the link!
- 04 Jun 2021, 10:04
- Jump to forum
- Jump to topic
Re: Sirius Magnetic Antenna Installation on XC90 Help
Hey! Forgot to follow up. I ended up switching my phone plan to an unlimited data plan and subscribing to Sirius XM through the app. For the connection from my phone to the radio, I am using an Amazon Echo Auto plugged into the Aux port and that actually works really well. Seemed to be the cleanest ...
- 05 Jun 2021, 03:54
- Jump to forum
- Jump to topic
Check your Banjo PCV bolt
This is the Banjo from my 2002 2.5ltr XC70 (part number i think is 8653884) it has a very small diameter hole that i can pass wire though. There is no ball bearing/slug or anything that can come loose and destroy your engine. It has 01-02 stamped on the head. I believe Volvo fitted defective bolts t...
- 06 Jun 2021, 03:38
- Jump to forum
- Jump to topic
blower motor for ECC going on blink
A week ago, on the hottest day of the year so far, the normal behaviour - fan speed going high on request for maximum AC gradually reducing as bin temperature falls stopped work in a short journey. After a few minutes the process restarted, ran for a few seconds and then died. I reasoned that this w...






