FCP Euro just emailed me about their Spring Brake [sic] Sale. It runs 3/15/23 through 3/21/23. Get up to 20% off parts. Post here to let us know which parts have the best discount.

While waiting on parts I disassembled the rear differential. To my surprise the bearings and gears were in excellent shape. Also the AOC oil was clean. Unsure where the source of the the noise was. After disassembly I learned that the differential has a pinhole vent on the back. The AOC has the vent...

Added text to the photos.

Sorry for the inactivity, I stopped pursuing this issue since the wind noise is not terrible, just that it's smaller when I taped around the sunroof, so figured something could be improved, such as the glass adjustment, seal, etc. Still really appreciate everyone's suggestion, I'll try e.g. checking...

Hello everyone, my name is Mats and I'm from Sweden. My dad always had Volvos and I my first car memory is of his yellow 142, then in the 80's we have a green metallic 245 GL and that was followed by a 440 GL and 940. I learned to drive in the 440 and it was an ok car. My first own car was a an Audi...

Purchased a new Valeo MAF sensor (OEM supposedly) and installed. Still was getting P0111 code. Ordered a used MAF online from salvage yard, made sure it was Bosch. Installed used Bosch and code has not returned in the last week and almost 300 miles. Low idle on cold startup and cooling fan running c...

Question 1- do you still have the old starter motor? If yes- get it tested by qualified shop and see if it is works perfect to begin with. Question 2- where you bought your new starter from? If it was from advance auto or auto zone don't be surprised if they don't work out of the box. You can try to...

Update: I believe I found the issues, there is apparently an inline fuse on the starter cable, it is on the side of the battery off the positive side, kind of hard to see. Have 12V before the fuse, 0 after. Stupidly expensive part (~$90 currently) for just a cable and fuse, but here's the part # for...

Haynes Manual (paper) for V70/S801998-2007 says NA engines should have compression of 13 to 15 bars. Turbo engines 11 to 13 bars. Difference between high and low not to exceed 2 bar.
volvolugnut