I feel like many members here would advocate for pressure testing the system at this time. Some crafty members were able to drill spare coolant cap and install pressurizing port/valve there. Some(me), would be too lazy to do it and would pay dealer/shop 1 hour labor just not to do it. Some, would go...

I could smell it, I knew wherte the leak was but white deposit was barely visible. When the car was hot I saw tiny bubbles coming from the corners of the coolant bottle. Spraying some dishsoap water showed bigger bubbles. Try smearing liquid soap around the coolant banjo bolts at the turbo. Or do th...

I finally received my new fog lights after ordering them a little over a month ago (they were on back order). I just installed them today and figured I should post what I did in case anyone else wants to reference it. Here are the aftermarket lights I bought on iPD (made by Professional Parts Sweden...

BlackBart wrote: ↑21 May 2025, 11:24

matthew1 wrote: ↑21 May 2025, 07:48 2x 1800ES, 1x 1800S

https://santafe.craigslist.org/cto/d/sa ... 26823.html

That's 5400.

Hey, waaait a minute, that's abscates line.

850 Manual Trans at Pic N Pull FYI: saw this today at the Sherwood Pic N Pull in Metro Portland OR area www.picknpull.com/check-inventory/vehicle-details/YV1LW5504S2153094 Car has a manual 5 speed in it. External slave cyl. Not sure if it's original or it was swapped in but able to shift it into all...

Sorry if this is in the wrong place. Since this isn't mine I didn't want to post in the classifieds. If it needs to be move please let me know. I've seen this for the past 2 weeks on craigslist, looks to be a well cared for family member at a good price. Maybe someone here wants to pick it up. https...

That is very funny that is literally all it takes. Contacted another dealer outside of my town and they gave me the correct info. Turns out that TJ 16761 is the PDF/Document outlining the software, and P/N 30677036 is the correct TCM update which includes the stop/neutral control fix. Just providing...

For a while now these pressure..there was just something that did not make sense. If the TCM commands 122 psi hold pressure, a static parameter...well that is too low, but according to the internet, at WOT at the clutches we should get up to 287 psi at 80 psi main line pressure So I guess here we ha...

I bought the Bilstein B4 struts.

Compressing the spring was a challenge but I figured it out.

Good luck and if you find something that works well and you are happy with post it here for others to read about.

Take care

Paul

I just want to send Thanks to all in this thread. It is very valuable and give me a quick boost start to read out information from my ECU, V70 2006 BiFuel. Denso ecu wuth a sh7055 cpu. I started off by the simple scripts and code dikidera provided. They run successful and was able to read out flash....