Salut Matt !

I've taken boards as i've found them. Generaly, i use US ones (Volvopartswebsite.com)...

I hope all my MVS Friends are fine !

Time after time, this car start to come back to life... !

Thanks Vova585.
i do not like to do not know... I've found the guitly part : the rheostat. That's an efficient forum : make users to use their brain...
Part replaced. Of course.

Manov

Today, i've taken down the fuel tank to get access to this hose... I'm gonna change it for a new brake hose, and by the way, i will also replace all the fuel lines hoses, which seem to be as old as the car...

FuNkY !

Continue to repair my 850. Today, I've tried to disconnect the fuel tank. The both hoses didn't want to come and they broke... I prefer not to speak about fuel hoses... Fuel pump connector.jpeg The outer size of the the nipple on the top of the fuel pump is 9mm. Can i use these replacements parts ? ...

I work on fuel lines today. For the quick broken connectors, a dealer proposed me this : I order also the all fuel lines :

... I fight with an old 850 issue, if i do remember well what Abscate told me once. What kind of tungsten carbide metal drill bit could someone recommend to me to get out of this issue ? My metals drills break the ones after the others. And as the fuel system is open near, i can't heat the hub. Scr...

Although not listed, I think it is called a fuel pulse regulator. I can only think it is a device to steady fuel flow pressure. I have attached the fuel line it is part of, however, in this case for North America, it lists it is only fitted with the fuel pulse regulator on certain chassis number ra...

If the rotor is warped, then no matter what yo udo you will get vibration. New ones are cheap enough unless they have enough width left and you can find someone who still has rotor turning equipment. I had to have this done on a brand new set of Zimmerman rear rotors many years ago! Good luck! Neil...

I'll have no choice to take the torche... Pare feu catalyseur.jpg The motor of the plate ACC is good to be replaced. Roue dentée clapet volet clim.jpg I've replaced gearbox rings Clip bague levier de vitesse.jpg Bague levier de vitesse.jpg Bagues leviers de vitesses.jpg The motor upper mount needs t...

scot850 wrote: ↑10 Nov 2025, 19:46 This is the drawing you need for the clips:

https://www.volvocarstorontoparts.ca/a/ ... 65270.html

Neil.

Thanks a lot Neil.