Hey all-- This last weekend I replaced the front right lower control arm on my 1998 V70 AWD. It's the four-bolt control arm. I've replaced a handful of two-bolt control arms but found the four-bolt version to be a different animal. Here's what I did: 1) Two days prior sprayed the ball joint pin and ...

<<< Edit by Matthew — be careful with steel bolts in the aluminum block! Double check the torque values (ask here!) They may be aggressive... if you know, please chime in here. Use a 1/4 inch torque wrench for this work with the block, no bigger! >>> Hey all-- I know it's been written before, but I...

Hey all-- Finally got fed up with the host of evap codes on my 1998 V70 AWD and went ahead and replaced the canister hoses, rollover valve hoses, purge valve (and surrounding hoses), and the three inches of rubber line connecting the small vent filler tube to the hard plastic line coming from top of...