Here this is minimum connection to CEM on bench. https://www.matthewsvolvosite.com/forums/download/file.php?id=74839 On D connector: Green: HS CAN-L to pin 14 OBD White: HS CAN-H to pin 6 OBD Grey (pin 6 ): GND Yellow (pin 8 ): +12V Blue (pin 15 ): +12V Also it needs +12V on the both big connectors ...

Just tried my new diamond wet saw, works as planned, leaves a nice slurry but no dust whatsoever. Its a win.

Triumph C7000,
rated 7K lbs.
posts can be set as far or near as desired, no drive cables from side to side.
120v.
8 foot posts.
6 foot rise if ceiling is high enough.
$3300 delivered. Neighbor said he can unload it with his tractor.

Another summer with warm temps have arrived. Has anyone used VIDA to fault trace and diagnose AC functions? What's the problem with your AC? VIDA may be of some help with AC diagnostics but I doubt VIDA can tell you if the charge is just right or if there's air or moisture in the system. Best to us...

vtl wrote: ↑16 Jun 2023, 14:16

oscilloscope wrote: ↑16 Jun 2023, 14:12 i have managed too find a supplier over in the UK , it should be with me pretty soon i'll guessing.

DSLogic?

yes DSLogic Plus , 400mhz sampling rate & 256 onboard memory.

I just want to say thank you. Took her apart and got it back together in record time. I'm laughing at myself about that picture. I didn't remember there being a spring on the rod and didn't even realize that was it lol. Really appreciate the pictures and insight. I would have been goofing around wit...

but its not open. Where is the sensor or switch. ? This might be related to broken rear glass I had fixed last week. Maybe the repair guy disturbed something or glass got in the hatch panel. It may be related to the rear glass. Some cars, not mine, route the wire that's grounded when the tailgate i...

window heater wire sounds likely, that was the scene of the repair. I don't think the rear window heater is part of the tailgate closed wire path. There should be a separate wire film pattern on the rear window with a different set of wires going to it, the pink wire from the 54/50 connector and a ...

This evenings findings: 1. We changed the gearbox 1,5 years ago and now when the pan is off the car I could easy feel the bolts between the flywheel and torque converter. They where all loose :roll: and now I'm hoping this could have been the rattle from my engine. 2. The rod bearings have all play ...

Okay, it's been a few days since I could take a look at this, but today I have a free Saturday, so I got back underneath the car and took another look at things. Where the carrier bracket meets the bottom of the car, there are four bolts holding it in, and those four bolts pass through not just larg...