Important: after pressing bushings in, during control arm installation, remember to align (push up with a jack, typically for us DIYers) the control arm before you tighten things down. This puts the arm at "ride height". Without doing that, you're fixing the position of the bushings at ma...

I just replaced a Valve Body on an S80 V8. Shifted perfect right after installation. didn`t bother with resetting adaptation. The fluid had been changed 1000 miles prior so the fluid counter was reset then ( close enough ).Don`t get a rebuilt unit for cheap, or get a rebuild kit. Part of the problem...

The Volvo anaerobic is made by Loctite. If you look on the Safety Data Sheet for Loctite 518 it says this: 2. HAZARDS IDENTIFICATION LOCTITE 518 IND 6ML 2096062 2096062 United States Anaerobic Adhesive None identified If you look at the Safety Data Sheet for the Volvo anaerobic it says this: 2. HAZA...