Search found more than 3369 matches
- 14 Jul 2020, 05:19
- Jump to forum
- Jump to topic
Re: WTB 2008 xc90 parts.
Ok still looking for the drivers lower tail light, and drivers side mirror. Can’t see paying $150+ for a tail light that I can get locally for $40. Problem is from the 7 yard I’ve gone to, all I’m seeing is 2006 and older. Tail light must be from an ‘07-‘14. Same with side mirror. Try Row52 to find...
- 14 Jul 2020, 05:31
- Jump to forum
- Jump to topic
P80 AWD Driveshaft removal , rspi movie
Couldn’t find this by search so linking here
- 14 Jul 2020, 11:26
- Jump to forum
- Jump to topic
Re: Ideas for parts cars and project
The 1998 electronics will have to be modified to drive the VVT on the 1999 turbo exhaust. That could get to be a big project.
The ECC controller is 1999 special so that wou;d have to be sorted too.
The ECC controller is 1999 special so that wou;d have to be sorted too.
- 14 Jul 2020, 14:52
- Jump to forum
- Jump to topic
Re: '04 XC Engine Misfiring-Further Updated (Moisture ruled out - possible defective coils, bad MAF)
Good progress, maybe order up some peppermint bags to repel rodentia
- 15 Jul 2020, 14:27
- Jump to forum
- Jump to topic
Re: Financial Distress Parts Pool
I’ve added all my parts from the 1999 picked V70 and the 1998 black V70 Clarke to the Distress pool. Links here 1999 part thread https://www.matthewsvolvosite.com/forums/viewtopic.php?f=6&t=78551&hilit=1999+v70#p422364 1998 part thread https://www.matthewsvolvosite.com/forums/viewtopic.php?f...
- 15 Jul 2020, 18:10
- Jump to forum
- Jump to topic
Re: Fuel rail pressure still too low AFTER replacing sensor, fuel pump, PEM and filter
It’s very easy to kink the fuel line in the saddle tank design if you don’t run messenger line to pull the ejector pump line to the right place
This is described with photos in the xc90 forum by user shockwave
This is described with photos in the xc90 forum by user shockwave
- 16 Jul 2020, 03:04
- Jump to forum
- Jump to topic
Re: Fuel rail pressure still too low AFTER replacing sensor, fuel pump, PEM and filter
Pull the fuel pump out again and inspect the hoses for kinks. Shockwave had the dealer install his pump and they kinked it, twice. It was a gnarly one to diagnose as it would periodically unlink and work well.
- 16 Jul 2020, 04:47
- Jump to forum
- Jump to topic
Re: Free Vin Check | History report of vehicles before buying
Thanks Mvs folks, thanks for report, June
Flagged for removal.
I can’t do this from my pad for some reason, so I’ve flagged it
Flagged for removal.
I can’t do this from my pad for some reason, so I’ve flagged it
- 18 Jul 2020, 04:14
- Jump to forum
- Jump to topic
Re: Help with powering S60 seat -- Not in a Car
Hi all, came across this while also looking to turn a seat into a computer chair.
- 18 Jul 2020, 05:27
- Jump to forum
- Jump to topic
Re: Fuel rail pressure still too low AFTER replacing sensor, fuel pump, PEM and filter
Would suggest a fuel pressure gauge at the schrader valve to read the pressure Live ^^ This I don’t see any fuel rail pressure measurements with an independent gauge. That’s the missing data. When my PEM went I had no codes but the fuel pressure went to 52psi initially, after a minute started an os...






