Volvo Forum

Maybe only an RN block thing?

Here they are , right above the turbo oil return line. Oooof, those bolts aren’t coming out soon...

Who has 563 HP, is $365,000 poorer than me , and is in Second place??

,,,,,, this Guy!!

Horsepower is no use on the twisty bits, dropped him like a hot potato.

Permatex 518 and cam cover installed.

Both cams turning well

Those cheap Cardone Centric Autozone Pep Boys calipers are using pot metal pistons which will rust in place in 2-3 years in moist climates.

The Volvo ones last 15 years. You have to decide how many brake jobs are worth the price delta

Check valve in the brake line, too

You can estimate the amount for each cylinder by pouring the whole bottle of Seafosm into two And a half cups, then using half of each for each cylinder.

Ok, that was quirky Swede sarcasm

…label it “ Swedish meat ball buster….

The 1999 and 2000 p80s have clutch interlocked cranking through the ECU

If the clutch switch is giving up, they will cause inhibited cranking. You can confirm by using the starter relay bypass connector under the hood

Take plugs out and turn over by hand. It should turn easily. Then do compression test to make sure pistons cylinders are still good

The financial bean counter who removed keyholes from tailgate will be locked into a coffin in Hades with people outside looking for the key, while the fires of Eternal Damnation rage..

Search found more than 3371 matches

Re: Motor block leaks from between 2 halves

Rolling up a Royce Dawn

Re: The Resurrection of (10/1998 to 01/2021) Elizabeth 1999 V70T5M56 Cylinder Head Job

Re: 1996 850 Wagon Service Light On

Re: P2097...driving me bonkers... yes, AGAIN (P2 - 2002 V70 2.4T)

Re: Compression test questions

Re: Compression test questions

Re: 2000 V70 manual intermittent starting

Re: No start

Re: Any way to open the liftgate with a dead battery?