Hospital cases are up 100% vs last year. It’s a bad one. Get the jab.

That would work but if you just clean the rotor and wheel hub carefully, the snug up the m6 bolt holding the rotor on , you can measure runout. If the rotor is distorting from the Lugnut install, throw away the cheap rotors and buy them from Volvo and that will fix it. Another lesson in his saving 1...

Well, we were driving around today and found this character at ARF. Sleeping on it but looks like she will join us this weekend.

On her way home ….in the XC90

Thank the Creator you had a wagon. Try that in a sedan!


I have this bad habit of swinging to Lowe’s for a few things , grabbing Lumber, and forgetting I don’t have the wagon.

We hauled dog. We needed the xc90 as she has some Great Dane in her. Meet Juno

Nuts go forward on the struts. Ok, I just made that up. That is how they come from the factory though…

Be thankful you have the two bolt control arms. The four bolts on the xc70 and awd models are a brutal job

You are looking for continuity, approx 0 ohms.

In one step, this eliminates both PNP switch and wiring faults, so it’s high value diagnostics.

You are looking for continuity, approx 0 ohms. In one step, this eliminates both PNP switch and wiring faults, so it’s high value diagnostics. Thank you for clarifying that abscate, continuity. Is that when the multimeter beeps? Apologies for sounding stupid, I'm not very experienced with a multime...

Those look yummy

That’s what it looks like correctly dosed. Most people use way too much https://www.amazon.com/Permatex-51813-Anaerobic-Gasket-Maker/dp/B0002UEONM/ref=sr_1_1_pp?crid=2FCIA2RWKZEM0&dib=eyJ2IjoiMSJ9.JAOkVZAMy494raShdeDRVbLT7h1QHSQfisFjT54APNvmNeqXYGcQ1STGfSBGAoS82o9ArVEn1twBrBBI-ECfymeFJeWfDAgdT_v...