Just about every vehicle in my yard has or had a leaky AC system at one point or another. It turned out to be far easier to own the tools than to keep renting them from O'Rileys or taking it to someone else to do. Same thing goes for the parking brakes. I've done them so many times, I could probably...

Turned down an offer of a trade for a 911, can’t carry anything in that except feelings of inadequacy.

I'm feeling a strange pulling sensation on my leg....

IMG_1708.jpeg IMG_1708.jpeg So the SRS light is gone. After VIDA telling me SRS module was not responding I chased through the wiring in the console to the Module and found appropriate values on all wires associated with communication. I was told VIDA with the Mongoose JLR cable would do but it was...

bottom of that car is cleaner than the top of mine.

After you spray the car with sheep dip, do Dodge Rams follow you around? Ewe…… No, but the Border Collies in the area try to chase the car back into the field :D You're making me angry with how beautiful and clean that car is already, and that paint is my favourite colour offered on Volvo's! Could ...

That fluid looks excellent. The cutoff wheel on the other hand...

Actually, use a grinding wheel to smooth that out and clean it up. It has a couple more cuts left.

I run my little Dremel cut off wheels until they wear to the central metal collar. I feel that their smaller diameter allows for more fine work. Helped when I was cutting an O2 sensor out of the remnants of the exhaust hole. Pro tip: Don't cut it, use excessive heat.

Way to go with your "kid". Must be good parenting since they don't come with a manual and you cant connect them to VIDA DICE to figure it out.. It ain't easy. Great job to both parents and kid!

Hello MVS! Have you been hoping that rattle or clunk would go away on its own? Now is the time to fix it for good, during FCP Euro’s Labor of Love Sale. Use code EUROLOVE for 5% off $99+ and 10% off $499+ to get your Volvo in driving shape now! Just head to https://www.fcpeuro.com/ to browse now! Em...

Should be the standard 280mm rotor. Pads are all the same as is the caliper. Only difference at the front is the rotor 280 or 302mm, and the mounting bracket for the caliper. The 302mm rotor will not fit behind 15" wheels. Oops! yes 15" not 25" I had! Thanks for the catch Abscate! Neil.