What a great FS ad.

1. check wire harness to coils 2. if good, do a compression test 3. if good, swap #3 injector with other (or replace all 5) i would swap with another cylinder if i questioned if a coil was bad but i put a coil in #3 so dont think that would accomplish anything-----but thanks for the input where did...

Picked up a set as well. Just need to paint it silver once budget allows for it.

When and where did this ad run? Font looks like 1970's. volvolugnut I'm willing to bet it'd have been 1979 or earlier :D Bill Gates is trying to get built a small new-tech nuke generator, in a down & out Wyoming coal mining town. The path of least resistance through the money hurdles, lawyers, ...

Thank you for all this Abscate. I dither over this stuff and make myself miserable. I continue to read and it seems like every brand has their issues, with Car Done getting dissed badly as you’ve noted in the trusted parts thread. I am considering the Detroit Axle now. I get to keep my rack for free...

Used my P2 to drive up to Davidson County TN just south of Nashville. With 4 chainsaws and a few coolers in the back 4 of us helped do some tree cleanup the last 2 days. The southerners were biting their teeth while I safely drove over the icy roads. I am so fortunate that ice storm shifted north of...

Been a long time since I removed a vacuum tree. Does it not have an O-ring on there where it bolts down? If it does, it does not have to be cranked all the way down hard. Are the bolts too long so bottoming out before getting the tree tight?

Neil.

Got the s70 out and solved the no heat problem by adding coolant. 3 liters down. That's a lot! Any idea where it's going? Not yet. There is a seep at the right side radiator Metal-to-plastic tank junction. I hope that is it Sometimes those seeps at the plastic tank joint turn into a spray at high t...

Hi @abscate,

Do you have a photo to show how to spray in situ?

Wow!
But the cars are still raised on concrete blocks.
volvolugnut