And got my VIDA setup working this morning and cleared the codes. Everything is working as intended.

DIY: 2007 Volvo S60 VVT Hub & Cam Seals x 4 (or any P2 XC90, S80 2.5T, and 2.4 engines) - The issue of FRONT cam seals leak has been discussed too many times in different forums. After doing this job, you will understand why dealers charge $1000+ for this job, read on… - I am working on a 2007 ...

Drove on this rotor for way too long. Quite unsafe. Being poor is expensive. Two dohs!

Cars can be easily repaired, especially by you. Be glad no bodily injure occurred, much harder to repair such things. A car is just a car

Couple of bent valves , all the parts were fro. FCP so it will be a labor only job!! All new nuts , bolts,, hardware so the fitments will be a breeze. The philosophy of being nice for the next jobber pays of really nicely, when you happen to be that guy Yup! Always keep the next guy in mind... beca...

Thanks for the feedback above. I got so much education and money savings out of this website I wanted to contribute something back.

I bought my 01 2.4t V70 5 plus years ago with 138,000 miles. The transmission shifted fine when I test drove it, so I bought the wagon. It took a couple of days for me to figure out if it still had the original neutral control, and it did. My initial inspection of just "looking" at the tra...

Well, I just did the mats in the XC. I had what I thought was a good idea and used my electric power washer (it’s not a high power unit). I cleared out the driveway and laid them down. I put soap in the power washer and pre-treated stains and did some manual scrubbing, then I hosed them down for qui...

abscate wrote: ↑15 Jul 2022, 07:58 Apparently my video of me in a Speedo Pole dancing with a Star motiff has caused my

"application to be placed on file for future review"

It depends; shirt on, or shirt off!?! June

abscate
That post may take years to get out of my head.
volvolugnutr