Social distancing ( and maybe a little bit of a breather ) ...

Over 120,000 Sign Petition Calling for End to Live Coverage of Trump's Coronavirus Briefings More than 120,000 people have signed a petition calling on news broadcasters to stop providing live coverage of the White House's briefings on the coronavirus ... Newsweek Ending live daily coverage of Trump...

On behalf of MVS Please consultbwith your physician before you

Bathe in Bleach

Swallow UV light

Inject either of the above

I have a 1999 S80, currently fighting with a damn canbus issue for months now, but if i can solve it in reasonable budget i think i will going to do a LOT of work on the car and put it in my garage to keep it, it has only 130k miles in it. I will indeed make a lot of pictures, i think all the above ...

Rough Idle after Timing Belt change and Solution I just did my timing belt change on a Volvo C30 P1 2.4i exactly following the videos on fcpeuro and mtl carguy. I got my timing belt perfectly lined up with all timing marks lined up even after 2 sets of turning the crankshaft manually. I also used th...

I had a random shutdown issue on my 2001 S80, which I traced to an intermittent connection in the circuit that turns on the ECM relay ( thread link ). The base bracket (part 9456590) holding the ECM was loose, causing the circuit to intermittently break, which turned off the relay, which killed the ...

I don't know where you are in this fine state, or if you have access to a Pick & Pull type of junkyard, but I'd go grab a solenoid for next to nothing and see if the problem persists. If it does, then you can probably rule the solenoid out. If it's fixed, well there you go.

Remember Ni-Copp is incredibly cheap and easy to fit and flare. Bend it around a radius item to fit like a beer can (remove beer first for safety), a hockey puck, a socket, a large sombrero. Do your DIN bubble flare practice, then cut it off, put the flare nut on, repeat. Now cut it off again, and p...

Most of the stainless steel clamps are very low grade stainless, with predictable results. The ABA or stock Norma Volvo clamps cost more money but are much better quality and won’t rust. If you save Francs here, you need to up the inspection time investment accordingly. Einstein taught us that space...

The Red Brick has 285,335 miles on it now. The P0455 was a bad purge valve. It was annoying that I took the car for diagnostics and they proclaimed my purge valve good. Sure it was “clicking” when energized, but it wasn’t sealing. I took it off to bench test and realized what was going on immediatel...