There is art and science of broken bolt extraction. I expect there are many U Tube videos. It is not fun, but satisfying when successful. Best to avoid breaking the bolt stud in the beginning. Lots of your favorite spray (PB Blaster has many fans), heat applied, good wrench fit, and most important i...

Haynes Manual (paper) for V70/S801998-2007 says NA engines should have compression of 13 to 15 bars. Turbo engines 11 to 13 bars. Difference between high and low not to exceed 2 bar.
volvolugnut

I did not see it on work list, but you may want to check the valve adjustment. It used shims.

volvolugnut

It’s a sad tale but one worth understanding. A big heavy part at point A in space is worth more/less than same part in point B in space. I could find someone remove it I think. Im not sure how to get the crate done. Start with a pallet or two? My thoughts on crating: Try to find a used pallet large...

And, just like you said, you got thanked.
volvolugnutr

When breaking down moving or other boxes you want to reuse, cut the tape at the seams and fold them on the original fold lines. They will now lay flat for storage. You can tape over the old tape when you make up new boxes. Commercial type tape guns are great tools.
volvolugnut

The round chainsaw files work well to sharpen chains. Just be careful to hold the file steady at the same angle as the original edge. You can sharpen a chain by hand with the little effort in just a few minutes. The electric rotary file is not needed.
volvolugnut

Some people should not be allowed to use a sawsall.
volvolugnut

Fleet reduction? That is just wrong!

(Says the guy with 2 dozen vehicles.)

volvolugnutr

BlackBart wrote: ↑04 Apr 2023, 10:57 For Sir Lugnut -

200D ?


Mercedes_kleine_flosse_h_sst.jpg

Yup. One like that, but much less shiny.

I am still waiting for the laying on of the sword.

volvolugnut