I would pull cyl 5 plug and see what it looks like.... maybe all the plugs. I would also check fuel pressure. I wonder if you have a leak towards the back, and are not getting full pressure to the engine, and the engine is trying to compensate.... I didn't know LTFT could even get that high. Does CL...

If someone can identify a suitable replacement then that would be great. I have tried 3 or 4 and although they basically look the same they are dimensionally different. They have to be a snug fit for the parking brake cable as it takes a fair amount of force compared to the one you show which is jus...

You can run wires down in the rocker panels without pulling too much carpet

Chuck W wrote: ↑08 Nov 2022, 11:00 Let me see if I have some. (I did at one point)

Sweet. If you have the fogs/brackets too would also grab those (but no worries if you don't).

Boring. 1999 CDM uses same address as 2003 V70 CEM. This will be quick addition to read fault codes, VIN code etc via app from 200x? year V70 CEMs and or reset with ELM327. No need any mods to ELM327. Or can use already "CDM" option in Scan to do this but it will show as "CDM" et...

Went to pick up the new license plate.... I'll get it screwed down shortly. I'm trying to decide how. I may buy new stainless nuts, or I may just coat the threads with either anti-seize, or lanolin spray. Pm me your address and I’ll send you set of the nice SS belmetric cone nuts just for being so ...

Link to fender removal video and summary. Another 4 minute Robert gem

viewtopic.php?p=615978#p615978

There is only one position for the crank index to line up. Take the head off.

Now you can set the crank to the mark.

When you put the cams on , install them in their marks.

Installed the Simons 020-H5R exhaust on the 855R today. Definitely slightly deeper sound but not obnoxious. Will put some miles on it this week and see how it sounds.

Main fuel injection relay(grey one) on fan shroud?
Not having lambda light with ignition in posII along with all other lights means that ecu have no power.

Fuse no.1 ok?