Search found 11 matches
- 05 Jan 2018, 17:53
- Jump to forum
- Jump to topic
Re: 1996 850 Dust in Airbox from SAS?
That is just gross... it looks like the filter was burned. I don't think I've ever seen this happen from the SAS pump, but I would say that's where it's coming from. Pull off the hose from the pump side and see if there is any of that rusty yellow crap in there. I'm pretty sure (but not 100% positiv...
- 05 Jan 2018, 17:56
- Jump to forum
- Jump to topic
Re: 1996 850 Dust in Airbox from SAS?
Yes...it is from failed sas valve.I had this a long time ago...but mine just spewed water(actually...the engine inhaled the water) from condensation in airbox and maf. You need to cap the side of the hose which goes from sas valve to airbox,to cap the inlet for that hose at airbox itself and also to...
- 05 Jan 2018, 20:17
- Jump to forum
- Jump to topic
Re: 1996 850 Dust in Airbox from SAS?
You can drill a hole in the pump assembly to let that water out. See threads.
- 22 Dec 2022, 05:29
- Jump to forum
- Jump to topic
850R complete engine rebuild + some questions
Hello dear 850 lovers - my first post on this forum! I'm Frane and I come from Slovenia - a year ago, I found a great looking black 850 R. https://www.swedespeed.com/attachments/72cba470-b948-410e-bad3-01991b571eec-2-jpg.177073/ Car is in great shape, rust-free & freshly repainted, with complete...
- 22 Dec 2022, 07:40
- Jump to forum
- Jump to topic
Re: 850R complete engine rebuild + some questions
White injectors
DW200 fuel pump w/ wiring kit
Wideband AFR setup
Contact Aaron @ Vast Tuning for your ECU
And Welcome !
DW200 fuel pump w/ wiring kit
Wideband AFR setup
Contact Aaron @ Vast Tuning for your ECU
And Welcome !
- 19 Mar 2024, 18:51
- Jump to forum
- Jump to topic
Custom 3D Printed Parts for P80 Volvos
Hello MVS! We are VPrints, designers and producers of custom 3D printed parts for (mostly) P80 Volvos. We have dozens of custom parts and nearly 200 sales across Facebook & Etsy (link below) with all 5-star reviews. We utilize good engineering practices and top-notch post-processing steps to mak...
- 21 Mar 2024, 17:55
- Jump to forum
- Jump to topic
Re: How do we know our airbags still work on 1998 or so?
Originally, Volvo recommended inspecting or replacing airbags after 10 years (extended in 2003 to 15 or 20 years depending on model year). Per Service Manager Bulletin 88-017 in 2006, airbag lifetime has been extended to "the lifetime of the car". Does that mean the airbags will work? Mayb...
- 22 Mar 2024, 13:16
- Jump to forum
- Jump to topic
Re: How do we know our airbags still work on 1998 or so?
I dont know about P80s, but my 1994 940 airbags were working in 2022
Source: my face
Source: my face
- 06 Aug 2024, 22:37
- Jump to forum
- Jump to topic
Re: 850 T5 oil pressure loss: catastrophic oil cooler failure or headgasket?
You can remove and bypass the oil cooler on these cars( see Robert DIY YOUtube series) but that’s about $400 in labour spent at a shop. Compression test at $150 would be the best spend right now for your decision tree,
Cylinder head gasket failure is about 9.3x more likely than oil cooler IMHO.
Cylinder head gasket failure is about 9.3x more likely than oil cooler IMHO.
- 07 Aug 2024, 11:32
- Jump to forum
- Jump to topic
Re: 850 T5 oil pressure loss: catastrophic oil cooler failure or headgasket?
The engine oil cooler delete plate is available from Mother Volvo, 1366780. https://www.volvopartswebstore.com/products/volvo/Cap-Lubricating-System-Without-TURBO-Engine-131034-Without-TURBO-Engine-131035/1110079/1366780.html Also can obviously be sourced from a salvage yard, time permitting. Robert...






