Volvo timing tool kit. 1. Crankshaft Alignment Tool. Volvo part number 999 5451: Installs in block and aligns crankshaft. 2. Camshaft Adjustment Tool, Volvo part number 999 5452: Installs on rear of camshafts, locks and aligns camshafts. 3. Front Camshaft Bracket, Volvo part number ??? ????: Install...

31261819 is for Canada (CA), United States (US) and Korea, Republic of (KR).
31273510 is for all except Canada (CA), United States (US) and Korea, Republic of (KR).

A6 = Ignition 1-4-4 = Load signal Diagnostic trouble code (DTC) information Condition The load signal in the part load range is tested twice every engine revolution. If the load signal is constantly high or low diagnostic trouble code (DTC) 1-4-4 is stored Possible sources Open-circuit or short-circ...

The production of the N, RN and RNC overlap. Volvo introduced the new and phased out the old.

The B5244T3 is a RN.
2001-03 S60 2.4T
2000-03 V70 2.4T
2001-02 V70XC 2.4T.

regent wrote: ↑16 Sep 2018, 10:28 I am looking for any available info on maintenance,

2015.5 XC60 Owner's Manuals, including Maintenance Schedule.

It is not a bracket. It is a guard.
When installed, the verticals flank the fuel line connector at the fuel rail, to guard against accidental damage.

It means your fuel rail pressure is bleeding off overnight. Here is what is going on, the fuel rail pressure bleeds off overnight, when you you go to start it in the morning, it is fuel starved. Waiting 15 seconds gives the fuel pump time to get the fuel rail pressure back up. Causes could be a numb...

If you fill the tank with gas first, where you going to find the space for the Sea Foam? ........
Put the Sea Foam in first, that way your have the space for the Sea Foam and the two will mix as the tank fills.

Ocelot wrote: ↑08 Oct 2018, 05:46 Can anybody tell me what it's for?

It contains the ECM (Engine Control Module) and the TCM (Transmission Control Module).