This is an old thread but maybe I can help someone else out at some point When using the Torque App you need to create an accurate profile for your vehicle before it can give you an accurate reading on several of its readings, such as the vacuum/boost gauge. The app uses a default of a 1.5L 4 cylind...

Cancel that above

You need this guy..

Turbo oil return line is a good idea, those leak all the time as you know.

I can post more later if needed but e.g.
https://www.ipdusa.com/products/12374/O ... 815-125807
Volvo part number 271815 Oil squirter gasket kit

The turbo return line “gasket” will coat the entire back/ right side of the engine with oil and also look like a seam leak! If it really is a seam leak, there is a Austrian product called Kangaglue which might fix it

Sold here as JB Weld

Probably something else, turbo return or other line... I have to say the oil leaks are what scare me the most. I have already fixed numerous leaks (cam seal, oil thermostat, turbo feed, return, oil pump was resealed) And still it is leaking :D (most likely from the front cams now - someone had the e...

Mine looked like it was leaking from there as well, and changing the lower oil return line seal seems to have fixed most of the leak. You can somewhat see how the oil was coming from the drain and then filling the joint before dropping any lower https://i57.servimg.com/u/f57/16/41/73/43/24541810.jpg

Hmm, I do not remember seeing any access possibility back when I replaced the exhaust manifold.. probably something you have to know what you are looking for to see it. https://www.volvopartswebstore.com/showAssembly.aspx?ukey_assembly=233633&ukey_product=1116756 https://www.volvopartswebstore.c...

Maybe only an RN block thing?

Here they are , right above the turbo oil return line. Oooof, those bolts aren’t coming out soon...

This....is a red barchetta....

The symptom is a door that pops and creaks when opened and closed. If you look where the door strap connects to the pillar you can see movement on the body side of the strap, because the two spot welds have broken. There are dozens of posts about this problem over the years. Here is a good one from ...