Hello, I'm really happy that you have one off those... Actualy it was my father who created that chip and my grandfather who was the prototype designer for the btcc car. So I would keep a tight hold on that. I will take a look around and mabey I can find some old blueprints for the btcc car :) Kind ...

WOW!

Here are some some nice pictures from one folder.
https://www.dropbox.com/scl/fi/1jly3plj ... 3kdv8&dl=0

I di and I posted them but they have gone AWOL again? I'll have a look. Here we go again:

viewtopic.php?p=454139&hilit=850+racing#p454139

Hope this is what you were looking for!

Neil.

yes, a M7x30 would have a thread that is 30 mm long and had a nominal diameter of 7mm Quick OT question: how are american bolts measured? I never really understood how that works. The problem is some fasteners can be equal length and diameter but have different thread pitch. Coarse thread vs fine t...

yes, a M7x30 would have a thread that is 30 mm long and had a nominal diameter of 7mm Quick OT question: how are american bolts measured? I never really understood how that works. Diameter and length, and the thread is TPI (threads per inch). So a 1/4-20 bolt is .25 inches in diameter, with 20 thre...

Hello, the snake goes on leading edge of your sunroof glass.

Car recently passed 260k miles and 4 years of ownership. Aside from a couple no-starts this summer the car has been very reliable for the last 3 years. The no-starts this summer stemmed from a corroded ground wire to the block, so I replaced the whole negative terminal wire. This was the issue i not...

I had that "cutting off when cornering" happen to my '93 850. Ended up being a break in the air intake hose that would open up just enough to suck in unmetered air. Would start right back up and run fine.

Stumbled onto this thread while working a different problem

There is a water pipe change from 1998 to 1999 and the lower radiator hose is different in length and angle.

I'm sure everyone that knows you on here are thinking of you and your family at this time.

Neil.