I don’t think I used 2 whole liters, Clemens

Bumped the thread, under 2 liters

I've done this on two P80s: - Jack both the oil pan (with a piece of wood underneath) and the transmission (with a piece of wood underneath. - Disconnect side engine mount, lower torque mount, and upper torque mount while you jack away - Keep things level (i.e., this jack, then that jack...) go slow...

This may help viewtopic.php?f=1&t=61022

he only thing i noticed is that the intercooler hose running to the intercooler was duct taped by the previous owner.

a tiny leak here will kill you..I would replace that hose ASAP.

Wouldn't say it is junk, but it is not as good as they say.
Maybe still better than the original one from '95.

I doubt mine is bad due to old age, i don't have it that long.

The oil cooler lines on these cars are known for leaking where the rubber hose is crimped to the metal ends. Mine have been leaking for about 4 years, but it was a slow leak. Today I decided to repair them. The Volvo replacements are a steep $250 for the pair. There are aftermarket brands but the re...

got my new turbo to intercooler hose today and yes, even though the inner layer of the old hose appears not to be cracked, replacing it made a huge difference....it is still not silky smooth, so I will tackle the vacum hoses next. Reset ecu by removing negative battery cable for 10-15min in order t...

Seriously, people, cats are there for a reason! we have just one planet, so stop polluting it on purpose! THANK YOU! We actually have TWO planets. True story, but hidden from us by our government. Anyway, the other planet is all 1980s American cars. So nobody wants to go to it and we don't either, ...

Just replaced the seat release buttons on my 1996 855. These red buttons starts to break after 15-20 years of use, typically the front ones, as they get the most use. Didn't find a thread that describes the procedure, so here it is: You can get replacement buttons from IPD https://www.ipdusa.com/pro...

Btw, this is where I placed it. Extended the cable and reused the IPD bracket since I already had the holes for it. It is aslo much smaller than the IPD valve which makes installation easier. After driving with it for some time I have to say the difference is huge. Before boost control was pretty mu...