Although not exactly accurate here, it does feel good when someone can benefit from my mistakes. Thanks for the update.

No way, I could afford my V70 without this site. Thank you Matthew.

TisMe wrote: ↑24 Nov 2021, 19:51 The strength of the "clasps" seem to not agree with a lot of my chosen beverage sizes.

Most countries don't serve the ridiculous American sugar junkie sizes.

I'm sure I'm not the first to do this but I couldn't find anything while searching. One of my FOB stopped working a few years ago and getting a replacement was too cost prohibitive. I previously tried repairing it but was unsuccessful. This should work for both the earlier FOB without key and new kn...

I think you need Vida to activate. I turned off my seat belt chime in vida.

Hey Stu. The clunking on my VR drove me nuts. So much I replaced everything until I finally figured it out, much the same as you recently have. I was able to simply replace the sway bar bushings on my upsized sway bar (without even touching any of the fasteners which hold the subframe to the main fr...

Original bushings are glued to the bar. Yes, one need to weld something onto sway bar to limit lateral movement with greased PU bushings.

Front sway bar job is unfortunately PIA on this car. Rear is PIA too, but slightly less.

Original bushings are glued to the bar. Yes, one need to weld something onto sway bar to limit lateral movement with greased PU bushings. Front sway bar job is unfortunately PIA on this car. Rear is PIA too, but slightly less. It is a bad idea to weld to springs. The metallurgy will be changed and ...

Stu70 wrote: ↑26 Feb 2022, 15:18 I’m having difficulty with the above term ‘mount’ . I navigate to the iso. I select it … then I’m not sure what to do.

Select the ISO, Left click and select mount from the list
.
Once you mount an ISO it behaves like a disk in a DVD drive.

.
That's excellent! Not only did you went all out testing all the variables it resulted in success. Gotta feel great to rid of such a strange and terrible problem that's dogged you for a bit.

.

.

Should have the axle bolt, if so this could be the issue?
.


.