Search found 13 matches
- 22 Dec 2020, 03:16
- Jump to forum
- Jump to topic
Re: Damper Swtich Not Activating Properly
It’s we who are confused , you were clear. You do have dampers, not cables controlling air flow on your 1998 if it is like mine. Pull the driver kick panel down and see if you are getting any noise from the motors on the sides of the white climate unti. Look up and see if the linkages are in place. ...
- 16 Aug 2021, 19:43
- Jump to forum
- Jump to topic
Re: Vent Direction Switch
Unless you have a something like Vol-Fcr software and connecting cable it is unlikely it will read MCC/ECC codes. Most generic readers don't read that level of detail. I would help but no idea on the workings of the MCC unit other than knowing cables can come loose either due to connectors breaking ...
- 16 Aug 2021, 20:59
- Jump to forum
- Jump to topic
Re: Vent Direction Switch
When you first turn on the key does the MCC flash for 20 seconds? The Pre-Ford ECC & MCC have a self diagnostics which can be accessed from the control panel. I don't recall the process but when done, it will flash out the error codes on the MCC control panel. We did not get a lot of the MCCs he...






