You guys should have gotten notifications from this topic now. I traced it down to a non-ASCII dash in the title. Looks like a normal dash, but wasn't. I replaced it with a bog standard dash.

I think I may have a solution... It appears that Ford uses the same style of anti-drain back setup on the oil filter housing of their diesel F-150s and have had a rash of the same type of issue with the valve failing. Ford issued a TSB (22-2386) for the issue and have a part available, ML3Z-6A606-A....

MVS Readers, I haven't posted for a couple weeks. I am still fighting the vibration at the front end of my S80. Here is what I've done. 1. replaced the front right wheel bearing 2. replaced the front left wheel bearing 3. had the wheel balance checked at my trusted tire store (and discussed possibl...

Hey guy's thanks to TreverRhoads and pgill the Ford part works on the Volvo anti-drain back valve issue. I ordered the Ford part # (ML3Z-6A606-A) from https://www.fordpartspros.com (they have them in stock as of today, and they delivered it quickly i.e. three days from MO to Virginia) It arrived a f...

Corg you might find what you're looking for in https://www.matthewsvolvosite.com/the-1 ... challenge/ Follow the big blue link at the bottom.

Paul spent countless hours maintaining and documenting his S80 ownership.

Continuing from my P2 wiring diagrams thead https://www.matthewsvolvosite.com/forums/viewtopic.php?p=641218 , here are some P3 diagrams: Feel free to share yours, if you have some, that I haven't listed! 2007 - wiring diagram - V70 V70R XC70 XC90.pdf 2008 - supplement wiring diagram - V70 (08-) XC70...

I hope you don't mind me coming in on an old thread but did you get this fixed? I have a very similar sound with an xc70 T6. One garage has already replaced the top right mount but it had no effect on the noise. Hi! As mentioned in my above post, your car doesn’t typically make noise due to a faile...

Awesome write up, Pgill! I just want to wrap my query up and point out that KLR142 was right - the engine mount beneath the torque rod was collapsed and the engine was clanging away on the metal. As others here have pointed out, if you have one bad mount you definitely need to check the others. Afte...

Best. Thead. Ever! Just say'n. ;-) Bought 2007 S80 3.2 in 2018 with 98k for $6k, used as college car for a few years. Now I'm driving it because I really like it! 144k now and really enjoying this oldie and was inspired by @pgill to stick with it after the belt pulley melted, and took out the belt a...

Replaced the part, took < 5 minutes and part was $60, local shop wanted $280. Check engine is now off and idle is smooth, thanks all for your input!