It was the fuel pump. $794 + tow + initial diag.

Dealer drops tank to access pump. They do not use the access panel.

The VVT Hubs usually get loose around 150K. There is an O-ring kit for sales on ebay but it does not fix the "wobble" issues. The only option is a new VVT Hub. You can buy a VVT Hub in the US for about US $250/each. The Exhaust VVT is different from the Intake VVT Hub. More info here: Larg...

Do you mean the hubs have some lateral play? How much - how many mm approximately. Some play is not at all a problem. There is also the possibility of the belt itself 'wobbling' over the cam gears, this is usually related to a tensioner problem (same thing when the belt runs near one edge of the hub...

I’d start with a basic ELM327 type Bluetooth scanner & run it through your phone or tablet. Veepeak BLE OBD2 device & OBD Fusion app for IOS, Konnwei KW902 & Torque app for Android devices are the ones I use, very inexpensive & informative. No replacement for ViDA, but a darn good st...

Excellent tip above. I would also look close at the wires to the electrical connector for the coolant temp sensor (right on the thermostat housing). Also look with a flash light at the CEM for any water leaks (google up)