Howdy -- is there some resource out there that lists all the OBD codes for the C70 convertible 2000? Thank you!

I found a used OEM strut from the same gen (2001) that's only $50. Would you do that? The car is 20 years old with 145,000 miles

Thanks Eric. Defintiey the original is on there. Hit a road shoulder and although the wheel is fine (oddly), upon inspection the strut is def bent. Just got a quote for $370 for one with new (non-oem) part. Double that for 2 - so you were on the money.

I recently damage one of my front struts and it has to be replaced. I was told that both have to replaced -- is that normally the case? Also, if anyone has done a front end strut replacement reccently I'd love to know what the cost was (for one or two). Thanks in advance!

Out of the blue my car started shuddering, but only when while accelerating up to about 40mph. The car has 140,000 miles on it and the tires have about 10k on them. There's no vibrating when going down hill or my foot off the accelerator. When it's still I feel a slight shudder but it's not there wh...

Does anyone have any first hand experience in bringing back some beaten-up leather seats. Suggestions, tips, recommended products etc, would be greatly appreciated. I saw this product on Ebay but don't know if it's any good. http://stores.ebay.com/SEATS-RESTORE/_i.html?_fsub=1421989013 thank you for...

so I came to the conclusion that I had a mast problem and it was pretty easy to replace. so i went to antennamastsrus.com recommended by others and got a mast specific to my conv c70. It gives indepth instructions but when it says pull out the current mast the darn thing won't budge. Its supposed to...

My 95 940 horn is sounding like a dying duck and I'd like to replace it. I'd appreciate any trick/tips about doing that (location of horn etc). Also, I'd like to find a used replacement. I also need the mirror glass for the driver's side mirror. Thanks!

Will a knob from a 2000 C70 fit and work with a 1998 V70 wagon?? See attached photo of the 2000.

My antenna is stuck in the up position. Nothing happened to it in the up position it just stopped going down. When I turn the car or radio off you can hear the antenna motor running but its not bringing the antenna down. Any ideas?? Thanks.