Just to post an update on this and to help anyone out in the future - I ended up needing to drill the bolt out. I drilled the head out and was able to thread the bolt through the nut on the back, keeping it intact. The part drawing says it's an M6x16, but after getting it out it's definitely an M5x20.

This is a parts drawing. Does this cover the parts you are asking about?

https://www.volvocarstorontoparts.ca/a/Volvo_2000_V70-XC-24l-5-cylinder-Turbo/_51507_5701538/Carbon-filter-with-fittings/GR-328023.html

Neil.


That definitely looks like it! I was hoping it wasn't one giant piece, but ...

relatively easy as long as stuff ain't frozen. 1 'Torx' screw and 2 clip connectors


I know I'm bringing this back from the dead, but I'm currently dealing with rusted threads on the torx screw and the head is just about stripped out. It started fine, then locked up. I was able to use the top ...

I know this an old thread, but I'm curious about camber and the subframe spacers. I lifted my P80 with strut spacers and a custom set of coilovers and it was working, but I had some positive camber. I added the BNE camber plates and in less than 1000 miles the inner CV boot tore on the passenger ...

This is awesome! Something to attach to the slot that's on the dash near the corner would be cool too. I just took my kick panel off to find that's broken as well. I was thinking of trying to use fiberglass or epoxy to repair it, I just haven't had time to really get under there and look.


PXL ...

This is awesome! Something to attach to the slot that's on the dash near the corner would be cool too. I just took my kick panel off to find that's broken as well. I was thinking of trying to use fiberglass or epoxy to repair it, I just haven't had time to really get under there and look.

Stumbled on this thread after having bad luck with two aftermarket axles. My passenger was giving me a high speed vibration, but I figured I'd replace both. That's just my M.O when it comes to left/right parts.

Before installing the passenger axle I compared the bearings and there was a little slop ...

I know this is a couple months old at this point, but wanted to join the discussion. I bought my 00 XC with 215/65r15 and I think they only rubbed the inner fender on full lock, though I honestly don't remember. Looking back at some photos I have of the car, they did clear the spring seat, so that's ...

I know you said you don't prefer to ship, but I'm curious how much it would be to ship all the 3rd row seat stuff to 48334. Been trying to find a 3rd row seat for my car and it's tough.

Hey Matt, I see your location is Ann Arbor. Are you willing to do the exchange in person? I don't live far from there, so I'd be willing to remove my module and drive to you if that's an option. Probably easier/cheaper/faster than shipping.