Login Register

Search found 9 matches

by Lasershark
22 Jul 2023, 11:29
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: 1998 c70 hpt. ** trunk latch questions **
Replies: 5
Views: 635

Re: 1998 c70 hpt. ** trunk latch questions **

Thanks Neil, the wires that are visible look good and I'm not gonna tear apart the insulation. Might run a continuity and or voltage verification to the pigtail and go from there.

The key method has worked but I just had to offset the latch to the passenger side as the lock cylinder apparently has ...
by Lasershark
21 Jul 2023, 18:03
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: 1998 c70 hpt. ** trunk latch questions **
Replies: 5
Views: 635

Re: 1998 c70 hpt. ** trunk latch questions **

Thanks Neil, FYI my car is a hart top, not sure if that changes anything.

Looks like 400+ dollars means I will just continue to use the key.

I have never seen a c70 at my junk yards which is why I was hoping the s70 would be compatible. Can't for the life of me find if they are compatible or not ...
by Lasershark
21 Jul 2023, 17:15
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: 1998 c70 hpt. ** trunk latch questions **
Replies: 5
Views: 635

1998 c70 hpt. ** trunk latch questions **

The trunk latch has never worked with the switch on the door or the key fob. When I hit the switch on the door I can hear the relay click but it doesn't pop the trunk.

3 questions:

1. Will replacing the trunk latch motor likely fix this?

2. Do these parts commonly fail?

3. Are the 98-00 s70 ...
by Lasershark
25 Jul 2020, 09:42
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: 98 c70 2.3 AC pressure relief valve? or blown line?
Replies: 3
Views: 627

Re: 98 c70 2.3 AC pressure relief valve? or blown line?

I am not sure if the fan was in high speed mode. I am thinking possibly not as the air blows slightly warmer (not alot) at idle and while stopped for a while. I made a make shift pressure line from an old refrigerant lime and found the blown out line. When under the car, it's the line that hooks on ...
by Lasershark
24 Jul 2020, 07:15
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: 98 c70 2.3 AC pressure relief valve? or blown line?
Replies: 3
Views: 627

98 c70 2.3 AC pressure relief valve? or blown line?

I was sitting on the road awaiting an appt I had and it was very hot outside 100 degrees plus. I thought man its hot... I checked the outside temp on the dash and with the blacktop adding to the mess it said 124 degrees. Just as I thought I should find some shade... The R134 exploded out of the car ...
by Lasershark
10 May 2020, 19:56
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: P80 c70 hpt with p0442 and eval emissions never ready
Replies: 6
Views: 1505

Re: P80 c70 hpt with p0442 and eval emissions never ready

Awesome, thanks Richard! Very helpful hopefully it stays clean of codes as emissions will be coming soon, just re-registered the car last month.
by Lasershark
09 May 2020, 19:49
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: P80 c70 hpt with p0442 and eval emissions never ready
Replies: 6
Views: 1505

Re: P80 c70 hpt with p0442 and eval emissions never ready

Got the j hose and L hose replaced. L HOSE ha a visible tear on the long straight part (top of the L) cleared the codes and now we wait to see if it pops back up.
Thanks for taking the time!
by Lasershark
05 May 2020, 05:58
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: P80 c70 hpt with p0442 and eval emissions never ready
Replies: 6
Views: 1505

Re: P80 c70 hpt with p0442 and eval emissions never ready

Very helpful reply, more than I was expecting! Thanks a bunch, i will check it out.
by Lasershark
04 May 2020, 22:26
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: P80 c70 hpt with p0442 and eval emissions never ready
Replies: 6
Views: 1505

P80 c70 hpt with p0442 and eval emissions never ready

I have had this car for 12 years and have never really worked on it. Its always just been stock, reliable until it sat for a while while other cars were enjoyed.

Well i need the car now and sprung a p0442 and noticed the evap monitor is never ready or completed (1200miles).

I can turn a wrench ...