Search found 7 matches
- 16 Jun 2024, 11:19
- Forum: XC90 1st gen 2003-2014
- Topic: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
- Replies: 9
- Views: 1619
Re: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
Update, I took the car to a garage and had a disappointing quality of diagnostic from them (suggested based on DTC to just start with a new fuel pump) so I took it back. The thing they suggested which I hadn’t really thought of was manually clearing DTCs so the car can break out of any potential “li...
- 16 Jun 2024, 11:12
- Forum: XC90 1st gen 2003-2014
- Topic: Fix for EVAP Codes P2401 and P2419 - 2.5T
- Replies: 2
- Views: 3475
Re: Fix for EVAP Codes P2401 and P2419 - 2.5T
2010 Volvo xc90 3.2 fwd: Thanks for sharing this- I am chasing these EVAP codes as well, have changed the evap pump behind the spare tire, no change. Also noticed passenger a-pillar was showing dampness after a rain. drain holes on both sides badly clogged, cleared them out. Drivers foot well was so...
- 03 Jun 2024, 16:26
- Forum: XC90 1st gen 2003-2014
- Topic: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
- Replies: 9
- Views: 1619
Re: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
You may have a venting issue. While you are reaching 3/4, 1/2 tank, did you try to open the fuel filler cap and hear any vacuum? I haven’t explored that. If I have a venting issue, then what would be the solution? I assume this may be correlated with a faint fuel smell (driver side of tank, level s...
- 21 May 2024, 17:37
- Forum: XC90 1st gen 2003-2014
- Topic: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
- Replies: 9
- Views: 1619
Re: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
Follow up from last post I filled the tank fully after getting the car started and only 8 gallons went in, so the +5 added to get the car to start was NOT the only fuel in the tank, instead, about 8 gallons or so were already in the tank but unable to be properly supplied to the motor. Fuel pump and...
- 13 Apr 2024, 10:53
- Forum: XC90 1st gen 2003-2014
- Topic: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
- Replies: 9
- Views: 1619
Re: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
Further updates… I have not been able to scan any codes, either can’t get the car started or no code to scan… So, I received PEM Thursday and installed. Worth noting, this PEM is under the passenger side 2nd row seat which needed to be removed to access (just like if the fuel pump needs to be access...
- 10 Apr 2024, 14:16
- Forum: XC90 1st gen 2003-2014
- Topic: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
- Replies: 9
- Views: 1619
Re: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
UPDATE: i filled 1 gallon of gas and after turning the car over for a few minutes while hooked up to jumpers, it started! Worth noting, the fuel gauge shows just under half full and the message center indicates 180 miles to empty tank. New/continuing issue: - New CEL, have not confirmed what code ye...
- 10 Apr 2024, 06:46
- Forum: XC90 1st gen 2003-2014
- Topic: 2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
- Replies: 9
- Views: 1619
2010 XC90 3.2 P0087 - won't start after fuel filter & FPS
Hello all, 2010 XC90 3.2 FWD, ~162k miles, new to me EDIT: The car has a faint to medium fuel smell inside only after it has been sitting for a while, the smell goes away as soon as the car is started and start to drive. I had an issue with P0087 coding after car sputtered and died driving a couple ...






