Login Register

Search found 5 matches

by solo99
12 Apr 2025, 04:14
Forum: V70, XC70 and S80 2007-2016
Topic: How to reset the LTFT
Replies: 4
Views: 892

Re: How to reset the LTFT

I pulled the ECM fuse (nr 36). At least I now know the LTFT is carved in stone :). Put the fuse back in after 20 min, no effect. Pulled the fuse again, 1 hour later in contact push brakes etc, wait for another 2 hours. Put the fuse back in, checked the LTFT, still the same. I give up, there is no wa...
by solo99
11 Apr 2025, 11:37
Forum: V70, XC70 and S80 2007-2016
Topic: How to reset the LTFT
Replies: 4
Views: 892

Re: How to reset the LTFT

Are you sure? I thought the LTFT is a based on the STFT values over a longer period. If I disconnect the battery and the LTFT is still the same after reconnecting, then I must assume it was not reset at all. If it was, the LTFT would start at 0 and if there is still a problem, it would climb back to...
by solo99
11 Apr 2025, 01:59
Forum: V70, XC70 and S80 2007-2016
Topic: How to reset the LTFT
Replies: 4
Views: 892

Re: How to reset the LTFT

I was afraid there would be no answers. It seems to be a very difficult thing just to reset the fuel mapping. At least, I think I searched the whole internet for it. Since I came across the topic on this website about how highly important it is to reset the LTFT after a fix, I gave it a go. But I un...
by solo99
07 Apr 2025, 05:07
Forum: Volvo S40 & V40 2000-2004
Topic: Hard reset of fuel trims
Replies: 3
Views: 5241

Re: Hard reset of fuel trims

Hi Eddie. I'm in the same boat. Not replies to your topic, so it must be not an easy one. Did you ever figured it out?
by solo99
07 Apr 2025, 01:35
Forum: V70, XC70 and S80 2007-2016
Topic: How to reset the LTFT
Replies: 4
Views: 892

How to reset the LTFT

Hi, I had a leak on the intercooler hose and fixed this. After 500 miles, the LTFT is more stable but still at 12% - 15%. I did a smoke test again, but no leaks. I was thinking the LTFT has to be reset, since the leak has been there for a long time. The LTFT does seems to be 'stuck'. I checked this ...