All of the connectors for my coil packs the wire has become brittle and is exposed at the connector. See picture.

Can I use something like plastic dip and some electrical tape to seal it up?

If not suggestions? Thanks!

I didn't bother. They were too expensive in relation to the total value of the car. I just live with the dash warning. I think they are$90 each but you would need to confirm it.

I will do a dedicated post on it. Thanks again so much!

Here's what I just found on Volvo forums. I have been searching for days. When I added the word "Vida" to the search this thread came up. Exact same issue I am having.!! So it is the Torx on the back of the steering wheel holding it on, nothing else. They are T30 machine screws. The bolts ...

IMG_3078.png Here's what I just found on Volvo forums. I have been searching for days. When I added the word "Vida" to the search this thread came up. Exact same issue I am having.!! I can't get the torx screws to move is my problem now. I can't tell if they are T25 or 30..... https://vol...

Torx screws are in insanely tight. Can't break them free at all. I don't think they are connected to the airbag but could be....

Ahh I see what you mean, it is different! I would try prying that tab to the outside and see if it releases, one side at a time while pulling on the airbag. If that doesn't work, try prying it to the inside. You mean pry side to side instead of up and down? Here are pics from inside the hole. Pic 2...

Hmmmmm. No. That was not in any of the instructions anywhere including the VIDA.

I will try that now but they will have to be really long to reach the airbag.

Stand by

Here is the page from VIDA on the 2007 airbag removal, I really don't think anything has changed in the design, can you post a picture of your wheel, front and back? 23.jpg Here is an eBay Ad for an airbag that looks like mine. It does not have the post like the others. In the second to last pictur...

Been in here another hour and 1/2 trying both sides. Have the camera in there. I just can't see how the tab moves to release it. I can't see that little lever that is shown in the pictures with the camera, nothing. I am prying up as hard as I can with the blade above the tab and below the tab. Nothi...