173K miles

Ok, I dropped the oil pan yesterday and I'm happy to report I have no more warning messages, definitely an o-ring problem as well as blockage. I was missing an o-ring on the pickup tube, had couple of broken ones and one that was half. I also had some blockage on a channel on the top part of the pan...

Thanks, I will be dropping the oil pan over the weekend when I receive the o-ring kit, I do have bubbles in the oil and the milky/foamy may have been a residue of the flush or part of the o-ring issue since it doesnt seem to occur anymore. I did have to change the oil & filter again & it had...

Hi, I have a 2000 S80 2.9L that has a no oil pressure, stop asap message, I bought the car a few days ago at an auction and yes I was expecting to do repair work on it, I just need to pin point the right repair to do. Symptoms; 1. No oil pressure message 2. foamy/milky oil on dipstick and cap after ...

Update on cleaning the EGR valvle. On my vehicle, I had to remove the spark plug rail, detach the air flow pipe from the air filter in order to remove the intake pipes(replaced the clips as well) and manifold. this gave me all the room needed to remove the EGR valve and pipes with ease. Cleaned out ...

I did the tests #1 did not activate the EGR like it says and I could not find the wires described on 2,3 & 4. I also tried to remove the EGR valve but cannot reach the valve screws without removing the intake pipes so I have resorted to have a mechanic replace the EGR valve. Thanks for all the h...

I have cleared the code and it came back, also failed emissions with high HC and NOx. have not yet tested, I will do that tomorrow

code 2-4-1, egr malfunction, any diagrams that can help me remove and clean the egr valve