Searched a little bit about turning them off and I noticed a bunch of people giving the OP's a hard time about it being a "hazard" and whatnot. ANYWAYS, I don't always need my DRL's and sometimes I switch it to the corner lights and I'll forget to switch it back and they don't turn off whe...

Well got it to the mechanic...replaced the timing belt and the tensioner, all is well (or almost) since she starts/runs, but I get a P0011 and it still takes a few cranks to get it started and it is rough for a few minutes after turning on.

Yes - the timing belt not being tight is a huge issue. What an interesting coincidental failure.(If its the timing belt) . You may have suffered a timing belt failure. If so the intake valves are bent and the car will not start. It will not throw codes and will carbon up the plugs. Remove the timin...

Also, I don't really know if it's me or what, but lets say I try to start the car twice...the speed at which I can hear it starting seems to be different each time. I keep feeling like the second time is faster, but it never catches. *EDIT* Well we had our friend come by again to check out what else...

Some have reported and issue with the CEM central electronic module. They report that pulling the CEM fuse allows the car to start. may be worth a try - and its free If I pull the fuse for the "Central electrical module, interior courtesy lights, and progressive power steering" my horn an...

JDS60R wrote:Does the message screen show anything when you press "READ" and scroll through the messages ???

No matter if I search individual or let it do an overall it always tells me no codes found, and yes, I have done the read button a few times

I had an emissions notification before, but either way...why wouldn't my car start by now? I keep thinking maybe it has to do with the MAF or something, but wouldn't that have to do with the car not getting fuel? I have fuel and pressure, but the spark from the ignition coil seems to be whats wrong....

No orange triangle...all the only lights I have are an airbag light and a check engine light. I recently got my oil changed about 2 or 3 months ago, and haven't used that many miles on it since then

I plug it in and have it at the pos2...it says "communicating" and then after a few seconds switches to saying "reading codes" which then leads to a "no codes found" and then something about it passing

So I got another OBD2 scanner which does the same thing as mine...it says I have 0 codes even with my CEL on! I don't get it...why won't it read right?