I have one tool leftover. The crank holding tool made by CTA.

Also, have a couple new hoses. Radiator reservoir hose and overflow vent hose 2001 S60 should be the same for lots of models

https://www.ebay.com/itm/Volvo-Camshaft-Locking-Tool-CTA-2864/274552367968?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D225074%26meid%3De5af128e8eae4276ac73164954f3d2f7%26pid%3D100290%26rk%3D1%26rkt%3D3%26sd%3D274552367968%26itm%3D274552367968%26pmt%3D0%26noa%3D1%26pg%3D2060778%26brand ...

I sold my S60 so I'm selling all my Volvo tools.
See ebay for seal installers, ECU tool, cam locking too(good one), oil filter wrench, crank holding tool and crank drift for installing crank seal properly.

I can do a package deal to save shipping.

https://www.ebay.com/itm/Volvo-factory-drift-for ...

so I did some more digging and the N/A engine uses an oil collector box that is very different than the turbo version. saw a youtube vid of one that was cut open after replacement. the N/A type has some kind of diaphragm inside as well as some metal structure. so apparently these get jammed up ...

pulled timing belt cover and definitely oil traces but don't see leak as it's idling.If its due to PCV pressure I'm confused when looked at Vadis for this engine. non-turbo shows 3 hoses and bottom port connector on oil separator. how does this thing function? Vadis says remove oil filler cap and ...

do they really get pushed out of the bore or just partial and enough to leak? Is the new timing belt toast once it gets oil coated?

replaced cam seals and oil pump gasket/o-ring plus crank seal when doing timing belt. used installer tools for all the seals. started it today and looks like exhaust cam seal leaks. these cars are a total PITA. do the seals easily pop out of their bores. I checked crank pressure. negative at 1000 ...

can you describe the location of the blanking bolt. under timing cover or on backside of block near top/right?

The Volvos before the P2 series had a reputation of long life and reliability. That all goes out the window with the P2's. I have a 2001 S60 and have replaced more stuff than on any other car I have owned in my lifetime. Anyone who buys one better be a decent home mechanic or financially well off ...

So not one reply regarding tools for seal install.
The mandrel for the crank seal/oil pump is tool 9995455. A search online showed this tool used to be offered by 3rd party tool suppliers and now I can't find a single company who sells one. I have access to lath and can make one up if I had ...