I have a 1989 Volvo 740 Wagon for sale, It runs excellent . Its located in Vail, Colorado. Here are some pics of the car: http://imgur.com/a/mZO2x Pros: Strong Engine very reliable 4 cylinder Volvo motor. Manual Transmission Radio with Ipod Jack, newer speakers as well Sunroof Decent mpg for 4cylind...

I bought these to swap onto my 89 740 but apparently its not straight forward, there's some mounting issues that I didn't have time to deal with, I instead fixed my headlight lenses with Gorilla glue and cut up pieces from a gallon milk jug. Anyway here is the lights, they're listed on ebay.. I even...

Looks like the wiring is the least of the problems. :( I would need to drill 2 holes on each fender,and probably tap the correct threading in for the side marker assembly mounts and enlarge the center fitting for the side marker housings. Then find some holes with the center grill mounting brackets....

Basically, I needed to fix my turn signals and running light, and Decided to get both lighting assemblies off a 1990 Volvo 740. As you can see my 740 with dual sealed beam lights the housings don't hold up well and in the junkyards the situation wasn't much better, The lights I found on the 1990 740...

Thanks alot, I still haven't dug into this yet, I keep looking under the hood, looking at the parts that I will need to check, the throttle body removal doesn't look bad however, the linkages are plastic, I'm pretty sure they could break easily, So I'm going to make sure I have a supply of all the h...

Thanks alot, I just saw that people have unscrewed the manifold and pulled the whole assembly it back to the strut tower,sounds simple but that manifold bolt clearance is also tight. I think I will try removing the hoses on the throttle body side and I found that I should probably clean the IAC and ...

My 1989 740GL Estate Wagon 5spd, B230F engine (non turbo) no mods really other than a Cone Style Air filter and missing muffler. At least 200K. Speedo works after 30 miles or so stuck at 197K for a long time. I replaced my Oil Cap Gasket b/c there was leakage about 3 months ago, I thought the leakag...