I ended up having to dremel off both bolts. The passenger side I did from the bottom. The driver side was miserable because there are components in the way on the bottom and so I had to chop away at the top nut little by little. I ended up replacing the parts with some bolts and washers from Napa. F...

Thanks dosbricks, I'm following Ben's video from FCP and plan to pull the assembly up. It's just these two 12mm bolts that are giving me trouble!

unfortunately you did not :/

https://www.matthewsvolvosite.com/forums ... =1&t=54751

how did you solve it, abscate?

Thanks for the quick reply. I like the idea of partially dremeling and then prying with a chisel. What's weird is if you look at the dealer's schematic: http://www.jimellisvolvoparts.com/showAssembly.aspx?ukey_assembly=1060655&ukey_make=1099&ukey_model=16006&modelYear=1996&ukey_categ...

Hello, I'm in the process of replacing my radiator in my non-turbo right now. Of course a couple bolts snapped and the retaining clips are rusted through so I'll have to replace those, but the two 12mm bolts that hold the radiator in from the bottom are just spinning. They are held at the top with a...

Hi there, I have a few repairs I need to accomplish on my 1996 850 GLT (non-turbo). Most pressing is a radiator leak. I'd like to do a whole coolant clean and flush too. Next is a noisey serp. belt idler pulley (I already replaced the tensioner and tensioner pulley). And in the future, I'd like to d...

Hi there,

I'm looking for an overhead dome map light assembly. I think mine is tan but I don't mind too much the color as long as the switches are intact and functional!!!
I'm also looking for a passenger side foglight assembly. Thanks so much!

Will