Transmission does several things. Sometimes it goes through the gears normally, sometimes it shifts into neutral from 2nd gear and won't go into 3rd. Sometimes it starts out in 3rd gear and then goes into 4th. The code reads 322 but a rebuilt PNP switch was just installed and did not solve the probl...

Lee, you are absolutely right. I was writing yesterdays ditty just from memory (Mine's pretty bad),when I actually looked at the paper where I wrote the codes on -actually said A1- so we're back to the transmission. I still worry about too much dielectric grease in there. Getting back to the origina...

I put some small vise grips on the end that the wires are coming out of, so you can pull straight up on the Innerds part as you hold down on the outer cover(the part with the bolt flange ), but before you start pulling on it you have to stick a small pocket knife blade (I used a classic Barlow 3 inc...

Thanks for the quick reply Lee. As you can see, I can't seem to do that. I got those codes when I put the jumper onto A2. Since then I have taken the PNP apart, cleaned the old grease out, filed and sanded the copper contacts (the one with the longest sweep was worn down on one end more than the oth...

I tested for error codes on my '95 850 GLT and got 124 and 322. I need details about what needs to be done to fix this problem.
What does incorrect gear ratio mean?
What does mode selector faulty or short circuit to ground mean?
I WOULD APPRECIATE ANY INFO
Thanks, Phil