Get well soon, Robert, we need you down here with your miraculous Elkheart!

Wish you all the best and a good recovery from Austria, you're our hero!

Yeah, good, honest man.

Thanks for all your inspiration, Robert!

Great that it worked.

You can attach the tiny motor to it and test the whole unit putting a 6V Battery assembly towards it; at every change of +/-, the little cog should move and rotate the green cogs. So, if you want to test before final assemblage.

Cheers,
Alex

Yeah, been there, done that. (you normally want to use two shafts, when adjusting your mileage. one from left, one from right, leaving always on cog free...) Reassembly: start with the original shaft and move it in from the right side (according to your picture), put the first cog onto the shaft and...

That magnet comes from your speaker. Reattach with glue - the speaker will work again!

Hi JJ from PDX, If it's a 94 its extremely likely to be caused by thise rear abs sensors causing erratic readings for the module. It's unlikely to be caused by the 'modern' abs module after 95. go check those rear sensors with obd1, clear all codes and recheck. Trouble also cause those front abs rin...