Does anyone have a reservoir and washer pump to fit a 1980 that they'd like to part with?

Thanks,
Brooke

Jimmy,

Thanks so much. I'd have never figured that one out.

Brooke

Jimmy,

Thanks. So, to remove the AC belt, I don't decrease the tension on the belt at the compressor as I did on the alternator?
I, instead, just remove the crank pulley and take the belt off without touching the compressor?

Strap Wrench that is.

Jimmy, I believe that's what I have. I mistyped earlier. I put a strap ranch on the water pump belt pulley. That allowed me to hold the shaft in place as I removed the center bolt from the fan. Here's my next issue. On a model of this year, how do I release the tension on the AC compressor belt? My ...

Lummert
Thanks for your reply. On my 1980, the fan is metal and held on with a large center bolt on the radiator side of the fan.
I was able to remove it by holding the fan clutch with a strap wrench while backing out the center nut.

The timing belt on my 1980 245 broke. All guides advise removing the fan by removing the four 10 mm bolts behind the fan. However, I have a large metal fan that does not allow access to these bolts. I assume this is because it's an earlier model. There's a large center bolt on the front of the fan. ...