1995 850 GLT
Front wheel hub (bearing failure)
Power steering pump (Internal failure)
Steering rack (Excessive leakage)
Radiator (Massive leak at tank/core joint)
Search found 58 matches
- 21 Mar 2012, 16:12
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Assembling additional parts list for a new Failed Parts poll
- Replies: 41
- Views: 9659
- 07 Jul 2011, 11:24
- Forum: 240, 740, 760, 780, Bertone, 940, 960, V90, S90
- Topic: Ripoff? $2000 for wheel bearing replacement?
- Replies: 5
- Views: 1794
Re: Ripoff? $2000 for wheel bearing replacement?
The pulsation and grinding noises are consistent with metal to metal contact with the brakes. I'd have a good hard look at the calipers and rotors. I'll bet you'll find the pads have worn down into the backing material. If so, you will probably have to spring for new rotors, as well as the pads ...
- 07 Jul 2011, 09:05
- Forum: 240, 740, 760, 780, Bertone, 940, 960, V90, S90
- Topic: 1989 740T Trouble diagnosing engine problem
- Replies: 2
- Views: 770
Re: 1989 740T Trouble diagnosing engine problem
I hate it when the original poster leaves us hanging on a problem!
- 07 Jul 2011, 08:59
- Forum: 240, 740, 760, 780, Bertone, 940, 960, V90, S90
- Topic: Ripoff? $2000 for wheel bearing replacement?
- Replies: 5
- Views: 1794
Re: Ripoff? $2000 for wheel bearing replacement?
If they quoted you $2300 for everything, and then said the wheel bearings were $500 a wheel, I'd tell them no thanks on the wheel bearings, but please do the struts, springs, sway bar links and rear springs for the $300 left on the original estimate.
Something tells me that they won't go for it.
Run ...
Something tells me that they won't go for it.
Run ...
- 05 Jun 2011, 16:30
- Forum: 240, 740, 760, 780, Bertone, 940, 960, V90, S90
- Topic: Overdrive Mystery
- Replies: 4
- Views: 1198
Re: Overdrive Mystery
Just a quick update. I went ahead and installed the junkyard tranny/OD as received. The removed unit is a P type, as expected. No problems with the OD at all, so far.
As for the trans, it's got some synchro issues and some very sloppy internal linkage, but I can deal with it for now. I just wish ...
As for the trans, it's got some synchro issues and some very sloppy internal linkage, but I can deal with it for now. I just wish ...
- 26 Apr 2011, 07:04
- Forum: 240, 740, 760, 780, Bertone, 940, 960, V90, S90
- Topic: '89 740 Turbo Wagon SRS Light
- Replies: 10
- Views: 3036
Re: '89 740 Turbo Wagon SRS Light
Thanks, Jimmy. I'll make sure to take a look.
Jeff
Jeff
- 26 Apr 2011, 01:38
- Forum: 240, 740, 760, 780, Bertone, 940, 960, V90, S90
- Topic: '89 740 Turbo Wagon SRS Light
- Replies: 10
- Views: 3036
Re: '89 740 Turbo Wagon SRS Light
Haven't had time to mess with it yet. Changing trannies on Thursday, so will try to get to it then.
Don't like to leave a topic hanging without resolution.
Don't like to leave a topic hanging without resolution.
- 26 Apr 2011, 01:36
- Forum: 240, 740, 760, 780, Bertone, 940, 960, V90, S90
- Topic: Overdrive Mystery
- Replies: 4
- Views: 1198
Re: Overdrive Mystery
Went to the dealer today, and they weren't much help. The catalogue shows a J-P type for later 740's, but no straight J type.
I'm swapping the trans on Thursday, so I can swap my existing OD with the J type if I have to. It''ll be interesting to see what's in there now.
I'm swapping the trans on Thursday, so I can swap my existing OD with the J type if I have to. It''ll be interesting to see what's in there now.
- 26 Apr 2011, 01:30
- Forum: 240, 740, 760, 780, Bertone, 940, 960, V90, S90
- Topic: Need info on trouble shooting my project 89 745 Turbo.
- Replies: 3
- Views: 988
Re: Need info on trouble shooting my project 89 745 Turbo.
That's a nice looking wagon. i wish the interior in mine was that nice. Yours even seems to have a headliner!
I recently had to replace the entire in tank module on mine, due to the pipes rusting through, so here's a tip. Before removing the module to access the pump, mark the module position ...
I recently had to replace the entire in tank module on mine, due to the pipes rusting through, so here's a tip. Before removing the module to access the pump, mark the module position ...
- 15 Apr 2011, 12:26
- Forum: 240, 740, 760, 780, Bertone, 940, 960, V90, S90
- Topic: Overdrive Mystery
- Replies: 4
- Views: 1198
Re: Overdrive Mystery
Nobody has any insight to this? I guess I'll have to visit the dealer and talk to the parts guys. I've got a good relationship with them.






