... gear? Maybe someone managed to remove the B4 band anchor bolt and the third gear is gone now. Any other advice or suggestions? ...

B4 band reconnection to anchor bolt is extremely hard through B4 servo port, if you mean that.

I think your best course of action is to drop the transmission, open it, reconnect B4 band and replace the filter.

Someone touched the third gear band anchor bolt, the band is disengaged now. Normally it warrants ... the band. It is possible to hook the band through the B4 servo hole, preload it, a helper person screwing in the ...

... that this problem might be because someone had mistakenly removed the band anchor bolt to refill it with trans fluid and disconnected the band in the process. This seems ...

... DO NOT TOUCH 27mm bolt up top that holds the B4 band anchor. I actually followed along a member on SS that bought an S60 ...

... might check with the servo cover off is the condition of the 3rd gear band. To do this I use a rod through the servo pin hole to compress the band ... this may be option assuming the problem is not the servo cover or the anchor bolt was removed or a badly worn out 3rd gear band. How long has there ...

... flaring that would indicate the 3rd gear band was not slowing wearing out over time so maybe ... problem started, no one messed with the band anchor bolt? When you do replace the servo cover ... what's going on with the 3rd gear band (B4). Pull out the servo and inspect the cover, o-rings ...

... flaring that would indicate the 3rd gear band was not slowing wearing out over time so maybe ... problem started, no one messed with the band anchor bolt? When you do replace the servo cover ... what's going on with the 3rd gear band (B4). Pull out the servo and inspect the cover, o-rings ...

... with the A/T. If no previous flaring that would indicate the 3rd gear band was not slowing wearing out over time so maybe the problem can be corrected ... done previously before the problem started, no one messed with the band anchor bolt? When you do replace the servo cover do try to measure the ...