Uro parts

turbotim2 · Post by **turbotim2** » 18 Nov 2008, 06:48

Any info on Uro parts, particularly control arms? I had to replace them on one of the cars due to a worn out bushing after 32,000 miles. Not sure which brand I got last time, the new ones are Uro.

Post by **Ozark Lee** » 18 Nov 2008, 07:03

For control arms I don't know.

I've used a URO brand motor mount and a URO branded PCV service kit. The stuff I did use fitted up perfectly and has thus far performed perfectly.

I have my doubts about anything but OEM for control arms but it would be real nice to have a decent alternative. If you decide to use them keep us posted as to how they work out.

...Lee

turbotim2 · Post by **turbotim2** » 18 Nov 2008, 07:20

OK, thanks. They are already installed and had no problems during the install. Got both of them done in about an hour. I looked all over them for a "Made in ..." but found nothing. The name would make one think Europe somewhere but we know how that goes. Will keep you posted on longevity.

turbotim2 · Post by **turbotim2** » 07 Nov 2009, 13:44

Update - while checking on a noise coming from the front suspension, I found the ball joints are toast. I got 14,000 miles out of them, about one year! I guess my question has been answered about Uro parts.

chax · Post by **chax** » 07 Nov 2009, 15:31

I had a similar experience: I installed Uro control arms on my '94 850 in 7/08, and the ball joints were shot by 4/09! What's worse is 1) I never push it, and 2) I barely went 8k miles! You've been warned.

Post by **confused_al** » 07 Nov 2009, 15:33

Here is a report about URO radiator hoses:
http://volvospeed.com/vs_forum/index.ph ... msearch__1