2000 S80 Turn Signal Wire Connection

Familytruckster · Post by **Familytruckster** » 08 Apr 2010, 21:48

I lost the entire driver side turn signal, bulb socket and wiring harness/connector (there are just 3 wires hanging in the wind). I have the new lense and socket for the repair. The socket has a 3 prong male type connector. I have been unable to find a pigtail or female connector part that will allow me to attach the new parts to the existing bare wires. How can I complete this repair?

Post by **vegasjetskier** » 08 Apr 2010, 21:54

Answered your other post.

Familytruckster · Post by **Familytruckster** » 11 Apr 2010, 21:45

Thanks to Sam in parts @ Volvo of Dallas! He helped identify the correct parts needed for this repair. You need 3 repair terminal wires, he had 3 of Part #30656689 on hand. The 3 terminals fit into what Volvo calls a 'Insulator' part #978139(aks: plastic connector piece the 3 prong terminals wires fit into). When all 3 terminals are pushed into the insulator/connector it fits perfectly into the Lamp Socket Part #9178546 (aka: plastic turn signal bulb connector that goes into the plastic cover assembly). Cut the termianl wires to fit and use a butt/crimp connector to splice the the new wires to the old. Note: The green wire goes in the middle. I had to use trial and error for the black and white wires on the side. Missed on the first try but it worked on the 2nd.

court14c · Post by **court14c** » 02 Jan 2017, 13:04

This saved me! We lost our turn signal somewhere between CT and Montreal and just needed the prong, 9456432, replaced on one of the wires (we ordered a replacement turn signal light). Volvo said we would have to have the whole harness replaced which would cost about $500. Thanks for posting!!!